三大领域发力 PC塑料多触手领域延伸

PC透明塑料与不同聚合物形成合金或共混物，提高材料性能。具体有PC/abs合金，PC/ASA合金、PC/PBT合金、PC/PET合金、PC/PET/弹性体共混物、PC/MBS共混物、PC/PTFE合金、PC/PA合金等，利有两种材料性能优点，并降低成本，如PC/ABS合金中，PC主要贡献高耐热性，较好的韧性和冲击强度，高强度、阻燃性，ABS则能改进可成型性，表观质量，降低密度。

PC的三大应用领域是玻璃装配业、汽车工业和电子、电器工业，其次还有工业机械零件、光盘、包装、计算机等办公室设备、医疗及保健、薄膜、休闲和防护器材等。

 

聚碳酸酯是分子主链中含有-[O-R-O-CO]-链节的热塑性树脂，按分子结构中所带酯基不同可分为脂肪族、脂环族、脂肪一芳香族型，其中具有实用价值的是芳香族聚碳酸酯，并以双酚A型聚碳酸酯为最重要，分子量通常为3-10万。聚碳酸酯，英文名Polycarbonate,简称PC。

PC塑料是一种无定型、无臭、无毒、高度透明的无色或微黄色热塑性工程塑料，具有优良的物理机械性能，尤其是耐冲击性优异，拉伸强度、弯曲强度、压缩强度高;蠕变性小，尺寸稳定;具有良好的耐热性和耐低温性，在较宽的温度范围内具有稳定的力学性能，尺寸稳定性，电性能和阻燃性，可在-60~120℃下长期使用;无明显熔点，在220-230℃呈熔融状态;由于分子链刚性大，树脂熔体粘度大;吸水率小，收缩率小，尺寸精度高，尺寸稳定性好，薄膜透气性小;属自熄性材料;对光稳定，但不耐紫外光，耐候性好;耐油、耐酸、不耐强碱、氧化性酸及胺、酮类，溶于氯化烃类和芳香族溶剂，长期在水中易引起水解和开裂，缺点是因抗疲劳强度差，容易产生应力开裂，抗溶剂性差，耐磨性欠佳。

PC透明塑料可注塑、挤出、模压、吹塑、热成型、印刷、粘接、涂覆和机加工，最重要的加工方法是注塑。成型之前必须预干燥，水分含量应低于0.02%，微量水份在高温下加工会使制品产生白浊色泽，银丝和气泡，PC在室温下具有相当大的强迫高弹形变能力。冲击韧性高，因此可进行冷压，冷拉，冷辊压等冷成型加工。挤出用PC分子量应大于3万，要采用渐变压缩型螺杆，长径比1：18~24，压缩比1：2.5，可采用挤出吹塑，注-吹、注-拉-吹法成型高质量，高透明瓶子。PC合金种类繁多，改进PC熔体粘度大(加工性)和制品易应力开裂等缺陷。

 

合金塑料供应：

合金塑料	型号	制造商
销售热线：13528694940  张先生 在线 QQ：813986068 E -  mail：sales@rfxsj.com 企业网址：http://www.rfxsj.com
PC+ABS	4LOY® 10E27200 FR1
PC+ABS	ABSCOM® B100	Polymer Compounders Limited
PC+ABS	ABSCOM® B200	Polymer Compounders Limited
PC+ABS	ABSCOM® B300	Polymer Compounders Limited
PC+ABS	Abstron AN-312	Bhansali Engineering Polymers Limited
PC+ABS	Abstron IMC25	Bhansali Engineering Polymers Limited
PC+ABS	Abstron IMC45 FR V2	Bhansali Engineering Polymers Limited
PC+ABS	Abstron IMC45V	Bhansali Engineering Polymers Limited
PC+ABS	AIE PC/ABS 12G2F	Asia International Enterprise (Hong Kong) Limited
PC+ABS	AIE PC/ABS 12G6F	Asia International Enterprise (Hong Kong) Limited
PC+ABS	AIE PC/ABS A2200FR-3070	Asia International Enterprise (Hong Kong) Limited
PC+ABS	AIE PC/ABS A2200FR-6880	Asia International Enterprise (Hong Kong) Limited
PC+ABS	AIE PC/ABS A2200HF-T6	Asia International Enterprise (Hong Kong) Limited
PC+ABS	AIE PC/ABS A2200HF-T8	Asia International Enterprise (Hong Kong) Limited
PC+ABS	ALCOM® AWL 109/15 UV WT1217-11LB	ALBIS PLASTIC GmbH
PC+ABS	ALCOM® PC + ABS 750/8 PTFE5 UV	ALBIS PLASTIC GmbH
PC+ABS	ALCOM® PC + ABS 750/8 UV CF	ALBIS PLASTIC GmbH
PC+ABS	ALCOM® PC + AWL 750/20.1 WT1407-04LB	ALBIS PLASTIC GmbH
PC+ABS	Allen FR3030	SEKISUI Polymer Innovations, LLC
PC+ABS	ALTECH® PC + ABS A 1000/520.01 UV	ALBIS PLASTIC GmbH
PC+ABS	ALTECH® PC + ABS C 1000/500	ALBIS PLASTIC GmbH
PC+ABS	Anjacom® 050/45	Almaak International GmbH
PC+ABS	Anjacom® 050/65S	Almaak International GmbH
PC+ABS	Anjacom® 050/7020	Almaak International GmbH
PC+ABS	Anjacom® 050/85S	Almaak International GmbH
PC+ABS	Anjacom® 055/80-GF10 Natural	Almaak International GmbH
PC+ABS	Anjacom® 055/80-GF20 Black 91220	Almaak International GmbH
PC+ABS	Anjacom® 055/80-GF5	Almaak International GmbH
PC+ABS	Anjacom® 055/80-GFK 5/15 Natural	Almaak International GmbH
PC+ABS	Anjacom® 10/25S-UV	Almaak International GmbH
PC+ABS	Anjacom® R050/65S	Almaak International GmbH
PC+ABS	Anjacom® R050/7020 Black 91001	Almaak International GmbH
PC+ABS	Anjacom® R050/75S Black 91010	Almaak International GmbH
PC+ABS	Anjacom® R050/75S Natural	Almaak International GmbH
PC+ABS	Anjacom® R050/85S Black 91019	Almaak International GmbH
PC+ABS	ANSABLEND A15 000 0000 T65 V0	Daloga srl
PC+ABS	ASHLENE® 305	Ashley Polymers, Inc.
PC+ABS	ASHLENE® 307	Ashley Polymers, Inc.
PC+ABS	ASHLENE® 307HF	Ashley Polymers, Inc.
PC+ABS	ASTALOY™ PC/ABS A800LG	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS KMA	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS KMX	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS M130E	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS M130GF10	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS M130SHF	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS M150-28328	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS MC300	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS MT7228	Marplex Australia Pty. Ltd.
PC+ABS	ASTALOY™ PC/ABS TWG	Marplex Australia Pty. Ltd.
PC+ABS	AVP™ GLC08CP	SABIC Innovative Plastics
PC+ABS	Bayblend® 2953	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® ET3032 FR	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR1514	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3000	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3000 BBS306	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3001	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3005 BBS310	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3005 HG	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3008	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3009	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3010 HF	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3011	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3015	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3021	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3040	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3100 TV	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3120 TV	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3210 TV	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR3310 TV	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® FR630 GR	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® M850 XF	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T45 PG	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T50 XF	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T65 HI	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T65 XF	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T85 SG	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T88 GF-30	Bayer MaterialScience - Polycarbonates
PC+ABS	Bayblend® T95 MF	Bayer MaterialScience - Polycarbonates
PC+ABS	BESTPOLUX PCA45/01	Triesa Plastics
PC+ABS	BESTPOLUX PCA65/01	Triesa Plastics
PC+ABS	BESTPOLUX PCA85/01	Triesa Plastics
PC+ABS	BESTPOLUX PCAX/01	Triesa Plastics
PC+ABS	Blendfor® A 4000	SO.F.TER. SPA
PC+ABS	Blendfor® A 4000 GF/20	SO.F.TER. SPA
PC+ABS	Blendfor® A 6000	SO.F.TER. SPA
PC+ABS	Blendfor® A 8000	SO.F.TER. SPA
PC+ABS	Canuck Compounds 500 Series - BK 5-6-3	Canuck Compounders Inc.
PC+ABS	C-Clear™ K8272	Shanghai KumhoSunny Plastics Co., Ltd.
PC+ABS	CELEX™ 501.C	Trinseo
PC+ABS	CELEX™ 5200HF.K	Trinseo
PC+ABS	Cheng Yu C1200	Cheng Yu Plastic Company Limited
PC+ABS	Cheng Yu C6600	Cheng Yu Plastic Company Limited
PC+ABS	Cheng Yu C6700	Cheng Yu Plastic Company Limited
PC+ABS	ColorFast® FRPA100X	LTL Color Compounders, Inc.
PC+ABS	Color-in™ HAC-M	Shanghai KumhoSunny Plastics Co., Ltd.
PC+ABS	ColorRx® PA-0500NB	LTL Color Compounders, Inc.
PC+ABS	ColorRx® PA-2000RX	LTL Color Compounders, Inc.
PC+ABS	CP PRYME® PC/ABS PCA100	Chase Plastics Services Inc.
PC+ABS	CYCOLOY™ C1200HF resin	SABIC_IP
PC+ABS	CYCOLOY™ C2950 resin	SABIC_IP
PC+ABS	CYCOLOY™ C3650 resin	SABIC_IP
PC+ABS	CYCOLOY™ C6600 resin	SABIC_IP
PC+ABS	CYCOLOY™ C7410 resin	SABIC_IP
PC+ABS	CYCOLOY™ CM6140 resin	SABIC_IP
PC+ABS	CYCOLOY™ CM6240 resin	SABIC_IP
PC+ABS	CYCOLOY™ CM8722 resin	SABIC_IP
PC+ABS	CYCOLOY™ CX2142ME resin	SABIC_IP
PC+ABS	CYCOLOY™ CX7010 resin	SABIC_IP
PC+ABS	CYCOLOY™ CX7240 resin	SABIC_IP
PC+ABS	CYCOLOY™ CY2010 resin	SABIC_IP
PC+ABS	CYCOLOY™ CY6110 resin	SABIC_IP
PC+ABS	CYCOLOY™ CY6414 resin	SABIC_IP
PC+ABS	CYCOLOY™ HC1204HF resin	SABIC_IP
PC+ABS	CYCOLOY™ LG9000 resin	SABIC_IP
PC+ABS	CYCOLOY™ MC5513 resin	SABIC_IP
PC+ABS	CYCOLOY™ RCX7233 resin	SABIC_IP
PC+ABS	CYCOLOY™ XCM851 resin	SABIC_IP
PC+ABS	CYCOLOY™ XCY620S resin	SABIC_IP
PC+ABS	Delta CBT-1314	Delta Polymers
PC+ABS	Delta PCA 1103	Delta Polymers
PC+ABS	DENIBLEND E	Vamp Tech
PC+ABS	DENIBLEND H	Vamp Tech
PC+ABS	DENKA Polymer Alloy HS-K190	Vamp Tech
PC+ABS	DESLOY™ DSC891B	DESCO Co., Ltd.
PC+ABS	DESLOY™ DSC892C	DESCO Co., Ltd.
PC+ABS	Diablend 4500	DTR S.r.l.
PC+ABS	Diablend 4500/V0 HF	DTR S.r.l.
PC+ABS	Diablend 8500	DTR S.r.l.
PC+ABS	DIAMALOY ABSPC 750	Network Polymers, Inc.
PC+ABS	DIAMALOY ABSPC 754M	Network Polymers, Inc.
PC+ABS	DIAMALOY ABSPC 7901	Network Polymers, Inc.
PC+ABS	DIAMALOY ABSPC 9902 LM 1402 Black	Network Polymers, Inc.
PC+ABS	DUCTEL® CS9000
PC+ABS	Duroloy® AH-81	Unigel Plásticos
PC+ABS	Duroloy® AS-61	Unigel Plásticos
PC+ABS	Dynacom DA2540	Dynachem Co. Ltd.
PC+ABS	Dynacom DA5004	Dynachem Co. Ltd.
PC+ABS	EcoBlend® HAC8251NH	Shanghai KumhoSunny Plastics Co., Ltd.
PC+ABS	EcoFast™ FRPC/ABS-100%	LTL Color Compounders, Inc.
PC+ABS	Ecollent™ PC/ABS	Lucent Polymers, Inc.
PC+ABS	Edgetek™ CY1000 GR188	PolyOne Corporation
PC+ABS	Edgetek™ CY1000 UV FR V0 BL077	PolyOne Corporation
PC+ABS	Edgetek™ CY1000 UV NHFR V0 GR723	PolyOne Corporation
PC+ABS	Edgetek™ CY1000-10GF/000 D NC704	PolyOne Corporation
PC+ABS	Edgetek™ CY1000-20CF/000 BK001	PolyOne Corporation
PC+ABS	Ekaloy® 20 E I 6	Sattler KunststoffWerk GmbH
PC+ABS	Electrafil® PC/ABS 03009	Techmer Engineered Solutions
PC+ABS	ElectriPlast® EP-CF/PC/ABS	Integral Technologies, Inc.
PC+ABS	ELIX™ 5120	ELIX Polymers, S. L.
PC+ABS	ELIX™ ABS H801	ELIX Polymers, S. L.
PC+ABS	ELIX™ Ultra 4115	ELIX Polymers, S. L.
PC+ABS	EMERGE™ PC/ABS 7350	Trinseo
PC+ABS	EMERGE™ PC/ABS 7502	Trinseo
PC+ABS	EMERGE™ PC/ABS 7560	Trinseo
PC+ABS	EMERGE™ PC/ABS 7570EP	Trinseo
PC+ABS	EMERGE™ PC/ABS 7590	Trinseo
PC+ABS	EMERGE™ PC/ABS 7700	Trinseo
PC+ABS	EMERGE™ PC/ABS 7770	Trinseo
PC+ABS	EMERGE™ PC/ABS 7880ECO	Trinseo
PC+ABS	EnCom F0 PC-ABS 2007	EnCom, Inc.
PC+ABS	EnCom PC-ABS 0710	EnCom, Inc.
PC+ABS	EnCom PC-ABS 1310	EnCom, Inc.
PC+ABS	EnCom PC-ABS 7025	EnCom, Inc.
PC+ABS	EnCom WR PC-ABS 1245	EnCom, Inc.
PC+ABS	ENVIROLOY® ENV15-NC260	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC280	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC310	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC330	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC350	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC370	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC390	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC540	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV15-NC710	ENVIROPLAS®, Inc.
PC+ABS	ENVIROLOY® ENV16-NC300	ENVIROPLAS®, Inc.
PC+ABS	EnviroPCABS 5080	West Michigan Compounding
PC+ABS	EPalloy 1010R
PC+ABS	EPalloy 510
PC+ABS	ESTABLEND 0840 GF	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND 4500 T V0	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND 4501 V0/D	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND 6500 A	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND 6500 GF	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND 8500	Cossa Polimeri S.r.l.
PC+ABS	ESTABLEND PC ABS 4501 V0	Cossa Polimeri S.r.l.
PC+ABS	EXCELLOY CK10	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CK10G20	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CK10P	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CK55	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CKF51	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CKF51G20	Techno Polymer Co, Ltd.
PC+ABS	EXCELLOY CZ400	Techno Polymer Co, Ltd.
PC+ABS	G-Blend 65 PC/ABS
PC+ABS	G-Blend 85 PC/ABS
PC+ABS	Generic ABS+PC - Carbon Fiber	Generic
PC+ABS	Generic ABS+PC - Glass Fiber	Generic
PC+ABS	Generic ABS+PC - Mineral	Generic
PC+ABS	Generic ABS+PC - Unspecified	Generic
PC+ABS	Ghaed ABS/PC GAC 250	Ghaed Basir Petrochemicals Co.
PC+ABS	GLS Blends MS02	GLS Thermoplastic Elastomers
PC+ABS	HiFill® PC/ABS FR 6218	TP Composites
销售热线：13528694940  张先生 在线 QQ：813986068 E -  mail：sales@rfxsj.com 企业网址：http://www.rfxsj.com